Diy corner desk – A corner desk taking useless corner room and got it to a functional, where a person can sit. In the entrance ways, corner desks provide a place to sit and take shoes that have been through a rainy or wintry day. Corner desks are not very complicated to build, and may be made of standard construction lumber.
Cut two 22 1/2-inch board ends at a 45 degree angle. When they sit on the edge they need to look like a trapezoid, and the original length should not be affected. Place the boards on edge and match the ends together so that the boards form a 90 degree angle. Screw the boards together to maintain this 90-degree angle. Cut 33 7/8-inch board, like you cut the first two plates. Lay the board on edge and match both ends with the two other boards that are screwed together. Screw this board for the two other boards in this place. This is diy corner desk frame.
12 Photos Gallery of: DIY Corner Desk Ideas
Put on your safety glasses. Cut your sheet of plywood from corner to corner, so you have two triangular pieces. Add both of these plates on top of the frame so that the edges of the plywood and frame flush. Screw through both pieces of plywood into the frame. You double the plywood to avoid wastage. One 1/4-inch sheets would not be strong enough. Turn the frame over so that it lies on plywood. Position a 16-inch board in 90 degree corner so that it is perpendicular to the frame. The screw through the frame and into this table. Place the last two boards at right angles in the last two diy corner desk.