Backless bar stools – With a backless stool, you do not have to worry about rotation mechanisms, eliminating the need for rotating stools to sit on them. This allows them to build easier and cheaper than rotating handles, and you can decorate them however you want. The build them yourself you can also add a personal touch, such as making them, whether to add the height and width you want.
Cut 4-by-4-inch wood with a saw into four legs approximately equal to the desired height of the chair. Draw a circle whose diameter you desire for the seat of the backless bar stools on a sheet of 1/2 inch plywood. You will find this cut out in order to serve as the base of the seat. Divide 2-by-2-inch wood into four pieces a square frame fits evenly inside the circle of the chair, one inch from the outer edges of the circle. Cut out the circle with a saw. Layout of three 2-by-6-inch boards flat so that they measure 18 centimeters across, and place the circle at the top.
12 Picture Gallery: How to Make a Backless Bar Stools
Screw the legs place about 1 inch diagonally from the circle edge of the top of the circle and with 3-inch screws. Fix the support boards you cut previously in place between the legs using 4-inch screws. At this point, the basic structure of a stool visible, with four vertical legs and a thin seat. Align the top of the stool with strong glue and place the round board slots on the top of it, clamping them together to determine. Spray strong glue at the top of the plates and the side of the stool seat and bring a wood laminate along the exterior of the backless bar stools.
This post topic: Outdoor Ideas