Install A Copper Canyon Granite Countertop
Copper canyon granite – Adding a granite countertop for your kitchen decor not only changes but also adds value to your home. Special tools for cutting and polishing a granite slab are needed and therefore you should have a professional measure and cut the granite slab. If you have basic carpentry skills, you can install countertop yourself. Adjusting heavyweight requires a different style granite installation granite countertop can be used with a lighter.
Measure the top of the cabinets from front to back and side to side. Cut 1/2-inch medium density fiberboard thick MDF or leaves with a circular to fit the top of the cabinets saw. This gives the granite slab more support through the centers of the cabinet and also helps distribute the weight of copper canyon granite between the cabinets. Set the plywood cabinets. Use a carpenter’s level to ensure plywood is level front to back and side to side. Attach the MDF for cabinets with screws long enough to pass through the wood and wood cabinets. Wear granite slab in the room.
Insert a tube of silicone sealant in a caulk gun. Cut the tip of the adhesive cartridge. Lift the granite countertop enough to run a caulk underneath. Place strips of masking tape parallel to any sewing. Keep the tape within 1/8 inch of the seam. Epoxy mix according to package directions. The work of the epoxy in the seam with a wooden stick art. Smoothing the surface and removing excess. Allow the epoxy to dry. Remove the masking tape. Skip this step if your copper canyon granite countertop does not have a seam. Clean granite with a soft, damp cloth. Let the granite to dry overnight. Apply granite sealer according to package directions. Let dry.