Plans To Make A Wooden Picnic Tables

Author: septian | Categories: Table Ideas comments
Wooden Picnic Tables Furniture

Wooden picnic tables – A wooden picnic table is not as difficult to build as you might think. If you want, you can complete the basic picnic table project described in these plans and diagrams in a weekend. The finished picnic table large enough to seat six adults and is sturdy enough to last for many years. Wooden Picnic table Materials and tools, you will need some guy or treated cedar boards to make your picnic table. Buy 10 6-foot 2-by-4 studs and four 6-foot 1-by-8-inch boards. While you’re at the hardware store, get two pounds of 2 1/2-inch deck screws and some carpenter’s wood glue. Also make sure to have a table or handsaw, some large C-clamps, a drill with a screwdriver and wood-boring bit and a protractor or a miter box.

Cutting wooden picnic tables Parts, Click on the picnic table plans and assembly diagram included with this article. Print them out, and then keep them nearby. Cut 2-by-4 studs, as indicated in the plans. Place all parts on a clean, hard work surface.

Wooden picnic tables assembly, Arrange A-frame pieces as shown in the assembly diagram. Drill two holes for each session using a drill with a wood-boring bit. Apply carpenter’s glue where the buds participate. Screw deck screws through the holes. Drill two equally spaced pilot holes through the center of each of the four tabletop boards. Add tabletop components boards next to each other on the center top bracket.

Comments are closed.